Flying Hardware

(Click images for data sheets)

 LIGHT / MED DUTY RIGGING TUBES

CTL - Attach to the rear of PL-11 / PL-12 to accept interconnects and accessories.
7.6 lbs / pr.

Rigging_Tubes_1_Sm-1

 CBL CONNECTOR BARS

Solid steel, color-coded, angled bars to build the required hanging configuration.

CBLs_BS

EYE HOOK 

EHL - For anchoring or setting extreme up or down angles
4.2 lbs / pr.

Pull_Back_Sm

 QPL - Universal Quick-pin lock for securing all Tectonic rigging elements

QPL

 

VESA

VML - VESA connector bars provide a standard 400mm x 400mm bolt pattern compatible with most VESA mount systems capable of supporting 100 - 250lbs.

VESA_1_Sm

  

PL-11 Ceiling Mount

CML - PL-11 Balanced Ceiling Mount
450lb Capacity
Standard 1.5” NTP threaded interface
8.9 lbs lbs / ea

CML.png

 QSG_Cover_Thumb.jpg

Download PL-Series
Quick Start Guide

Front_Cover


Download PL Series Set-up

and Mounting / Rigging Guide

MORE INFORMATION

Tectonic Mounting Systems

The Tectonic PL Series panels include mounting points to accept both Tectonic  portable mounting tubes and VESA™ compatible mounting adapters. All mounting hardware is designed by Tectonic and engineered & certified by ATM™ Flyware.

Multiple Panel FLY rigging

 

Empress_House_Hang_2_WebTectonic mounting hardware allows for multiple panel installations where an exo-skeleton utilizing connector tubes and inter-connect bars from 0⁰ - 15⁰ is combined to create vertical coverage structures to cover nearly any space; including multiple balconies.

The Tectonic exo-skeleton can be hung from load-rated wire-cabling from top hang points and bottom pull points.

Tectonic panels are attached to this mounting structure and do not carry any load themselves.

single panel VESA mounting

Tectonic flat panel speakers look a lot like flat panel TVs and can even use the same VESA-mount hardware for permanent wall-mount installations. Here are a couple of guidelines for selecting an appropriate VESA wall-mount system:

• 100 to 200lb capacity. The mount should be able to support at least twice what the Tectonic panel weighs.
• 8” clearance from the wall. Tectonic panels need breathing room between the rear grill and the wall to faithfully reproduce lower frequencies.
• Universal VESA mounting size adjustment. VESA mounts are available in fixed or universal bolt patterns to connect to devices. Tectonic flat panel speakers need at least a 325mm W x 486mm H bolt hole pattern.

Here is a brief list of Universal VESA wall-mount systems that can accommodate PL-11 / PL-11NR:

Mfg                                   Model #
Premier Mounts       AM175
Crimson                         AE63LL
Crimson                         A63F
Crimson                         A631
Crimson                         A65
Crimson                         P65

OR

• Tectonic VML VESA-mount rigging bars provide a 400mm x 400mm bolt pattern compatible with most VESA hardware that can carry 100lbs or more.

 

San_Rafael_2_Sm

WARNING!! -  MOUNTING TECTONIC PRODUCTS SHOULD ONLY BE PERFORMED BY TRAINED AND QUALIFIED PERSONNEL FOLLOWING ALL SAFE MOUNTING STANDARDS, AND MUST USE ONLY ORIGINAL TECtonic AND VESA™ RATED COMPONENTS.

Always install Safety Cables!

 

PL-11_Hinged_VESA_Sm            PL-11_VESA_Floor_Stand_1_Sm

 

Subscribe to receive Tectonic Audio Labs press releases and news letters.