DML-10

The DML-10 is the fundamental building block of the Tectonic PL Series bending wave audio speakers. This stand-alone transducer provides system designers with a modular solution for the deployment of full-frequency; very low distortion; wide, even-coverage audio. DML-10s can be mounted vertically in portrait or landscape orientation, horizontally down-firing or in any suitable architectural feature.

Features

  • Versatile form factor
  • Multiple mounting options including VESA compatibility
  • One-way low mid-high device with no internal cross-over
  • Even coverage at all frequencies

 

Recommended Processor Settings

DML
Cross-over: 110Hz, 18dB Butterworth HPF

EQ
High Pass – Butterworth 30dB/oct Slope 90Hz
Low Pass – Butterworth 6dB/oct Slope 17kHz
Peaking – 265Hz Level: -5.5dB Q: 3.1 B/W: 0.46
Peaking – 449Hz Level: +2dB Q: 1.1 B/W: 1.27
Peaking – 965Hz Level: -5.2dB Q: 0.9 B/W: 1.53
Peaking – 2.8kHz Level: -1dB Q:0.9 B/W: 1.53
Peaking – 5.3kHz Level: -2dB Q: 3.2 B/W: 0.45
High Shelf – 4000Hz Level: -3dB Q: 1 B/W: 1.39

 

 

 

 

Specifications

  • FREQUENCY RESPONSE110Hz – 20kHz (+/-6dB) 93Hz – 20kHz (+6dB/-10dB) (SWL)
  • CONTINUOUS POWER RATING200W RMS
  • PROGRAM POWER/PEAK POWER300W/400W
  • RECOMMENDED AMPLIFICATION400W @ 8 ohm
  • SENSITIVITY92dB @ 1W/1M
  • PEAK OUTPUT 118dB
  • NOMINAL IMPEDANCE8 ohm
  • HORIZONTAL COVERAGE165°
  • VERTICAL COVERAGE165°

Downloads

Data Sheet (PDF)